Welcome, Guest
Username: Password: Remember me

TOPIC: Halo2 sail

Halo2 sail 3 years 11 months ago #1165

  • ajg76
  • ajg76's Avatar
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
Hi all

I have just become the proud owner of blaze 814 and being on the heavier side of heavy I have also opted for the Halo2 sail in addition to the Blaze sail.

Just looking to see if anyone out there has any suggested rake settings for this new sail, or is it all still a bit too new for this to have been worked out yet. I have the standard base settings from Mike of half a hole down from the top of the chain plate on the shrouds and boom sitting horizontal with kicker on, but what about lowers and tension. Does it follow the same rationale as the blaze rig where it is all kept "sloppy" (i have the tin rig rather than carbon).

Any comments/thoughts gratefully accepted

Blaze/Halo 814
Andrew Grant
Blaze/Halo 814
Aberdeen&Stonehaven YC...
The administrator has disabled public write access.
Time to create page: 0.193 seconds
Powered by Kunena Forum