Welcome, Guest
Username: Password: Remember me

TOPIC: Kicker set up

Kicker set up 5 years 11 months ago #481

  • andy76
  • andy76's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 5
  • Karma: 0
Does any one have a diagram of the kicker set up for the Blaze ? as mine fell apart last week and i need to make a new one

Cheers

Andy

592
The administrator has disabled public write access.

Re: Kicker set up 5 years 11 months ago #482

  • Cirrus
  • Cirrus's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 93
  • Thank you received: 2
  • Karma: 1
Hi Andy

If you go on the 'old' forum (or reborn Blaze Yahoo 'instant message board') under 'photos' there are some set-up ones that include the kicker - in short it is a 16:1 arrangement. A-Block attached to kicker webbing - usually about 30mm diameter, B-= cascade to a 20mm block C- 2nd cascade to a 20mm double block. At base of mast 2 x swivel 20mm blocks or similar ... anyway a photo is worth a lot of words !

Good Luck ...

Cheers - Mike L. (Cirrus)
The administrator has disabled public write access.

Re: Kicker set up 7 months 3 weeks ago #1302

Hi Folks, having re-patriated my Blaze, I decided to make a proper job of updating my kicker as illustrated on the Yahoo forum.

However, I don’t understand how the lines marked in blue, (either wire made up to suit or vectran or similar,) are attached near the base of the mast. It looks like they are glued to the bottom of the boat in some way! I would be grateful if someone could let me know how it should be fitted.
General Arrangement for Revised Blaze Kicker
The administrator has disabled public write access.
Time to create page: 0.212 seconds
Powered by Kunena Forum